background image

Lit. No. 74299, Rev. 01 

August 15, 2020

35202

CELL PHONES

A driver's 

fi

 rst responsibility is the safe operation of 

the vehicle. The most important thing you can do 
to prevent a crash is to avoid distractions and pay 
attention to the road. Wait until it is safe to operate 
mobile communication equipment such as cell phones, 
text messaging devices, pagers, or two-way radios.

VENTILATION

NOISE

Airborne noise emission during use is below 95 dB(A) 
for the snowplow operator.

VIBRATION

Operating snowplow vibration does not exceed 
2.5 m/s

2

 to the hand-arm or 0.5 m/s

2

 to the whole 

body.

1/4-20

109

154

1/4-28

121

171

5/16-18

150

212

5/16-24

170

240

3/8-16

269

376

3/8-24

297

420

7/16-14

429

606

7/16-20

9/16-12
9/16-18

5/8-11
5/8-18
3/4-10
3/4-16

7/8-9

7/8-14

474

669

644

909

1-8

1-12

704

995

1/2-13

1/2-20

11.9
13.7

24.6

27.3

43.6

26.9
53.3

93

148

49.4
69.8

77.9

106.4
120.0

8.4
9.7

17.4

19.2
30.8
35.0
49.4
55.2
75.3
85.0

M6 x 1.00

M12 x 1.75

M8 x 1.25

M14 x 2.00

M10 x 1.50

M27 x 3.00

M22 x 2.50

M30 x 3.50

M24  x 3.00

M20 x 2.50

11.1

19.5
38.5

67

107

7.7

613

778

1139

1545

450

428
562
796

1117

M33 x 3.50
M36 x 4.00

2101
2701

1468
1952

325

M16 x 2.00

231

167

M18 x 2.50

318

222

Recommended Fastener Torque Chart

Size

Size

Torque (ft-lb)

Grade

5

Grade

8

Metric Fasteners Class 8.8 and 10.9

These torque values apply to fasteners

except those noted in the instructions.

Torque (ft-lb)

Grade

5

Grade

8

Size

Size

Torque (ft-lb)

Class

8.8

Class

10.9

Torque (ft-lb)

Class

8.8

Class

10.9

Inch Fasteners Grade 5 and Grade 8

 CAUTION

Read instructions before assembling. 
Fasteners should be 

fi

 nger tight until 

instructed to tighten according to the torque 
chart. Use standard methods and practices 
when attaching snowplow, including proper 
personal protective safety equipment.

TORQUE CHART

 WARNING

Vehicle exhaust contains lethal fumes. 
Breathing these fumes, even in low 
concentrations, can cause death. Never 
operate a vehicle in an enclosed area without 
venting exhaust to the outside.

Summary of Contents for 35202









Reviews: