CHANGING THE MENU LANGUAGE
English, Spanish or French can be selected by the user.
œ
Turn on the power (TV and VCR).
œ
Set the TV to channel 3 or 4.
œ
Press the VCR button on the remote control to select
the VCR operation mode.
œ
If the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
1
Press the MENU button.
The main MENU appears.
2
Press the CH/TRACK
l
(or
j
) button to select the
Language select option, then press the SET button.
3
Press the CH/TRACK
l
(or
j
) button to select the
language of your choice, then press the SET button.
The Language select menu disappears, and the
on-screen menu language has been selected.
PROGRAMMING CHANNELS
Once the initial setup is completed, the channels can be
programmed again. This may be necessary if you are
switching from cable service to antenna reception.
NOTES:
œ
Make sure the antenna or cable connections are
correct. (See pages 11 and 12.)
œ
If the input source is set to L1 or L2, press the INPUT
button on the remote control until the indicator panel
shows a channel number.
Channel Programming
1
Follow the steps in Before starting above.
2
Press the MENU button.
The main MENU appears.
3
Press the CH/TRACK
l
(or
j
) button to select the
VCR setup option, then press the SET button.
The VCR setup menu appears.
CATV/TV@@@@@@@…CATV@TV
Cable@box@@@@@…No@@@Ch02
MTS@@@@@@@@@…ST@SAP@Mono
Audio@out@@@…ST@L@R@Mono
Child@Lock@@@@@On@@…Off
Off@timer@@@…Off@2Hr@6Hr
Auto@AV@Select@On@@…Off
[CH§‡]†Option
[SET]†Select@@[MENU]†TV
4
Press the CH/TRACK
l
(or
j
) button to select the
CATV/TV option, then press the SET button to select
“CATV” (if you subscribe to a cable TV service) or
“TV” (for normal broadcast reception through an
antenna).
The CATV indicator “C” displayed on the indicator
panel means that the cable TV system is selected.
5
Press the MENU button twice.
The main MENU appears.
6
Press the CH/TRACK
l
(or
j
) button to select the
Auto tuning memory option, then press the SET
button.
The VCR programs all unscrambled channels that
are available in your area into the tuner memory.
The “Auto tuning memory” message is displayed
while the channels are automatically set.
NOTE:
If automatic channel programming is started
before the antenna or cable TV connection is made, the
“No Signal” message appears.
Before starting
BASIC OPERATION
SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999
22
