LOCATIONS OF CONTROLS AND INDICATORS
Front Panel
Reference pages are shown in square brackets.
1
POWER button
2
Cassette loading slot
3
REW (rewind) button [30]
This button is used both for rewind and reverse
picture search.
4
PAUSE/STILL button [25, 30]
œ
Press this button in the record mode to
temporarily stop a recording (PAUSE).
œ
Press this button in the playback mode to view a
still frame (STILL).
œ
Press this button repeatedly in the still mode to
advance the picture one frame at a time.
5
FF (fast forward) button [30]
This button is used both for fast forward and
forward picture search.
6
PLAY button [24]
7
STOP/EJECT button [4, 24]
8
REC (record) button [25, 37]
9
Indicator panel [6]
F
Remote control sensor
G
CHANNEL selection buttons (
l
and
j
) [16, 24, 37]
H
Front-panel AUDIO/VIDEO input jacks [25, 39]
Connect the audio and video outputs from an
external unit (i.e. a video camera, second VCR) to
these jacks. To record the signals coming from the
external unit, press the INPUT button on the
remote control to display “L2” instead of a channel
number (see page 25). If only one audio jack is to
be used, connect it to the L (left) jack.
Auto A/V Selection
There is no need to unplug the VCR from the TV to
view another video source on-screen. When the
VCR power is off and the output cable from an
external unit is connected to these front A/V input
jacks, the signal from the external unit is
automatically sent to the connected TV screen.
NOTE:
The POWER, STOP/EJECT, REC,
PAUSE/STILL, FF, PLAY and REW buttons illuminate
according to each VCR mode.
9
8
7
6
F
2
1
3
5
4
L-AUDIO-R
VIDEO
AV INPUT
a
REC
c
PLAY
f
REW
e
FF
b
STOP/
i
EJECT
h
PAUSE/STILL
G
POWER
CHANNEL
H
SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999
5
