8
button to toggle the SALT mode on (display will show “S1”). Press
and release again to toggle it off. For more beach hunting tips,
see the WET SAND HUNTING section.
e. The VOLUME can be adjusted and listened to when the VOLUME
icon is flashing by using the UP and DOWN arrow buttons.
f. The NOTCH Discrimination (“no” on the two digit display in the
MENU) can be adjusted as follows:
1. The UP/DOWN arrow buttons will allow you to choose which
NOTCH category to alter.
2. Once you have chosen which category to change (FOIL,
NICKEL, TABS, or ZINC), pushing and releasing the ALL METAL/DISC
button turns the NOTCH filter ON or OFF.
- If the square next to the chosen category blinks quickly (on
more than off) that target will be accepted.
- If the square next to the chosen category blinks slowly (off
more than on) that target will be rejected.
- When in the SEARCH mode, if the square is ON, the target is
accepted; if the square is OFF, the target is rejected.
Remember, to exit the MENU mode at any time, simply press the
P/P (MEM) button to return to the SEARCH mode
4. The AUTO GROUND button enables you to achieve a precision
ground balance with one touch. Auto Ground Balance is explained
in more detail on page 15. This button also toggles the SALT mode
on or off while in MENU mode.
5.
The P/P (MEM) button is used return to the search mode after
you set all your current settings when it is pushed and released.
As mentioned above, it is also used in Memory mode. If the P/P
button is pushed and held while hunting, the Precision Visual
Pinpoint Mode will be activated.
6. The TRACK button activates the Fisher Track AFS
©
- Adaptive
Feedback System. This fast auto-ground tracking system, enables
you to adapt to changing ground conditions without giving up
the ability to detect targets!
7. The ALL METAL/DISC button enables you to toggle between two
operating modes: a “true” all metal detecting mode or, with an
CONTROL PANEL
Summary of Contents for M-Scope COIN STRIKE
Page 27: ......
