background image

PROGRAM TIMER RECORDING

There are two program timer recording methods, daily
recording or recording on certain days of the week.

Example 1:

To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in 24-hour
mode (recording speed).

œ

Follow the Before starting steps, under “NORMAL
RECORDING”.

1

Press the MENU button until the (TIMER SET) menu
is displayed.

œ

“SUN” (Sunday) will be flashing.

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@@---@N

MON@@--:--@@--:--@@---@N

TUE@@--:--@@--:--@@---@N

WED@@--:--@@--:--@@---@N

THU@@--:--@@--:--@@---@N

FRI@@--:--@@--:--@@---@N

SAT@@--:--@@--:--@@---@N

DLY@@--:--@@--:--@@---@N

EXT@@ööööö@@ööööö@@---@N

2

Turn the JOG dial, until “SAT” (Saturday) is flashing.

3

Turn the JOG dial clockwise.

ø

The recording start hour position starts flashing.

4

Turn the SHUTTLE ring to set the recording start hour
(ex: 09), then turn the JOG dial clockwise.

ø

The recording start minutes position starts
flashing.

5

Turn the SHUTTLE ring to set the recording start
minutes (ex: 00), then turn the JOG dial clockwise.

ø

The recording stop hour position starts flashing.

6

Turn the SHUTTLE ring to set the recording stop hour
(ex: 17), then turn the JOG dial clockwise.

ø

The recording stop minutes position starts
flashing.

7

Turn the SHUTTLE ring to set the recording stop
minutes (ex: 00), then turn the JOG dial clockwise.

ø

The “SPD” (recording speed) position will start
flashing.

NOTE:

œ

If the set stop time is earlier than or the same time
as the set start time, the VCR will consider the stop
time to be the following day, and “T” will be
displayed next to the recording stop time.

8

Turn the SHUTTLE ring to select the recording speed
mode (ex: 24), then turn the JOG dial clockwise.

ø

“N” will start flashing.

9

Turn the SHUTTLE ring to select the desired program
timer recording mode.

Y . . . . . . . . . .  recording will take place

N. . . . . . . . . .  recording will not take place

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@@---@N

MON@@--:--@@--:--@@---@N

TUE@@--:--@@--:--@@---@N

WED@@--:--@@--:--@@---@N

THU@@--:--@@--:--@@---@N

FRI@@--:--@@--:--@@---@N

SAT@@09:00@@17:00@@@24@Y

DLY@@--:--@@--:--@@---@N

EXT@@ööööö@@ööööö@@---@N

ø

Repeat steps 

2

 to 

9

 to program timer

recordings for other days of the week.

F

Press the SEARCH button to save the settings.

G

Press the TIMER button.

ø

The timer recording indicator  

n

 will light on the

digital display, the VCR is now in timer recording
stand-by mode.

NOTES:

œ

To modify, cancel or stop timer recording, press
the TIMER button to cancel the timer recording
mode.

œ

To record everyday at the same time, at step 

2

select the “DLY” line.

RC4QR/U3 (SRT-7072 GB) Tue. June, 29/1999

20

English

Summary of Contents for SRT-7072













































Reviews: