English
60
AFTER USING THE CAMERA IN WATER
After using the camera in water, wash it with fresh water and dry it completely.
1
Turn off the camera, and close the battery/card compartment cover
securely.
2
Wash the camera with fresh water.
h
Fill a shallow basin with fresh water, and immerse the closed camera for
about 5 minutes. Rotate the monitor unit several times to clean it
completely.
3
Allow the water to drain out through the drainage holes.
h
Drain the water through the five drainage holes.
4
Dry the camera.
h
Use a dry cloth to wipe off any drops adhering to the camera, and leave
it to dry completely in a well-ventilated place away from direct sunlight.
h
Water may seep out from the drainage holes if the camera is not
completely dry inside. Take special care not to let water get inside the
battery/card compartment.
h
Do not use a hair dryer or the like to dry the camera. Exposing the
camera to high temperatures may cause the camera and/or waterproof
seal to become deformed.
Drainage hole
Drainage hole
Drainage hole
Monitor unit
Monitor unit
Summary of Contents for VPC-E1
