Description of unit
Mains connection
4-2 18L low temp incubator
Fisherbrand
Rear view
.
Abbildung 4-2 Rear view Fisherbrand
18L low temp incubator
[1] Fan
[2] Mains adapter
Mains connection
The mains connection of the device is done by connecting the enclosed mains adapter to the
100 V or 240V a.c. supply; mains fluct/-10%, 50/60 Hz
Useable space components
The surface of the useable space of the Fisherbrand 18L low temp incubator is reduced to a
minimum and therefore supports the protection against contamination and its easy and
efficient elimination. All of the parts of the inner container of the Fisherbrand 18L low temp
incubator are made of plastic (the racks are made of stainless steel) and have a smooth and
easy to clean surface.
A heat exchanger element [
; 1] in the rear wall serves to heat or cool the useable
space as required.
The useable space lighting can be switched on using the button
on the control panel.
Perforated plate
The metal plates have an anti-tipping device. The perforated plate is described in detail in
the chapter entitled Commissioning.
Summary of Contents for 50152744
