www.eu.fishersci.com/fisherbrand
31
4.4 Replacing the UV Lamp
Warning!
Ultraviolet (UV) radiation is harmful to the eyes and skin. Do not observe the
lamp directly when it is illuminated. This system equipped with a lamp cover to
prevent UV light leakage. This cover must be on at ALL TIMEs when a UV lamp
is installed.
Caution!
Keep the UV lamp straight in and out of the stainless steel chamber during its
installation to avoid any action that could cause the lamp to break.
In order to protect the UV lamp from getting contamination through hands,
gloves must be worn while handling the UV lamp by hands. Gloves are included
in the UV lamp package.
a) Switch system to Ready mode.
b) Switch off the system power,
Unplug the power cord.
Ready