14
Setting the QC Values
From the Initial Screen, enter the passcode 420024 to show the QC value setup
screen.
Press
▲
or
▼
to change the highlighted digit. Press
◄
or
►
to move to the digit
to be changed. Press
▲
or
▼
to increase or decrease the value. Change each
of the analyte QC values in this manner until the desired values are shown.
Press
ENTER
to save the changes and exit the screen. Press
to print the
current values.
User Login
Press
ENTER
from the
Initial Screen to show the Administrator login screen. The
Operator ID is preset to 100.
On entry to this screen for the first time, leave the
Passcode
blank and press
ENTER
.
Press
CANCEL
to return to the Initial Screen without enabling User Login.
ID Admin
The Administrator screen is shown.
