25
Holding the
Barcode reader
over the barcode on the specimen container, press
the Scan button on the
Barcode reader
. A red illuminated line will appear over
the barcode to be read. Move the
Barcode reader
to align the red line over the
barcode. When the
Barcode reader
beeps the barcode has been scanned. All
sample barcode IDs in a batch are read and stored in memory in sequence.
Samples must be run in the same sequence as scanned. This ensures IDs and
samples correspond. Prompts are displayed to show the next sample to be
tested.
Press
START
to begin the batch mode.
Press
CANCEL
to return to the
Initial screen
.
Press
ENTER
to enter a new screen to edit the Barcode ID.
Using the keypad or barcode reader to enter the Barcode ID, press
ENTER
to
confirm the ID entered and enter the next number.
Press
CLEAR
to clear the entered ID. Press
to print the list of IDs.
CANCEL
to exit to the previous screen.
Press
START
to save the IDs and return to the previous screen.
Up to 100 barcodes can be read. The screen will indicate how many barcodes
have been read.
Note:
Do not change Barcode reader or Test number settings before all
barcodes have been processed. Otherwise remaining barcodes
may be deleted.
