6
Mode
There are three test mode options. Press
ENTER
when
Mode
is selected to
change the
Mode
.
Note:
The Mode can be changed during normal testing for STAT tests.
Routine Test
Use for normal urine testing. The default test number ranges from 1 to 99999. It
resets to 1 every day automatically if
Auto Number Reset
is set to
Yes
.
STAT Test
Use for emergency urine testing. The default test number is from 100001 to
199999. It resets to 100001 each day automatically if
Auto Number Reset
is set
to
Yes
. The analyzer will automatically switch to
STAT
test and can not be
changed if the QC test has failed.
QC Test
Use to test positive/negative controls. If
QC lockout
is on, this test will be run
automatically. The test number ranges from 200001 to 299999. It resets to
200001 every day automatically if
Auto Number Reset
is
Yes
.
Note:
Ensure
QC Test
mode is used for testing positive and negative
controls. Use of any other mode will report the testing results as a
regular specimen and will not display proper “Pass/Fail” QC test
results.
Test Number
Select
Test Number
and press
ENTER
.
Enter the new
Test Number
. Press
ENTER
to confirm. Press
CANCEL
to
delete any changes and keep the existing number.
The first digit in the number will depend on the
Test Mode.
The first digit will be
0
for
Routine
,
1
for
STAT
and
2
for
QC Test
. This first digit is fixed and cannot be
changed from this screen. Tests run after this number is changed will be set
sequentially from the new number.
Note:
Specimens may be assigned the same test number. They will be
distinguished by test date and time in the Database.
