7
Continuous Test
Select
Continuous Test
and press
ENTER
to cycle the settings to
Off
or
On
.
When the selection is correct, select
EXIT
and press
ENTER
to return to the
Main
Menu
.
Continuous Test – Off (Single Test Mode)
Test one strip at a time.
Single Test
Mode performs 60 tests / hour.
Continuous Test - On
Test strips one after another.
Continuous Test
Mode performs up to 120 tests
per hour. When
Continuous Test
is on, the
symbol will be displayed.
Operator ID
Select
Operator ID
and press
ENTER
to increase the number by one. After
10
, it
reverts back to
01
. If
User Login
is enabled and
Operator ID
is 11 through 20,
this setting cannot be changed. Select
EXIT
and press
ENTER
to return to the
Main Menu
.
Units
Select
Units
and press
ENTER
to cycle the units between
Conventional
or
SI
units. If
User Login
is enabled and
Operator ID
is 11 through 20, this setting
cannot be changed. Select
EXIT
and press
ENTER
to return to the
Main Menu
.
Note:
Arbitrary results will always be printed.
Analyzer Configuration
Select
Analyzer Configuration
from the
Main Menu
to display the screen below.
Press
▲
or
▼
to
move
→
to make changes. After all changes are made, select
EXIT
and press
ENTER
to save changes and return to the
Main Menu
. If
User
Login
is enabled and
Operator ID
is 11 through 20, this
Menu
cannot be changed.
Printer Setup
Select
Printer Setup
to display the screen below
.
