background image

- 17 -

● Ultra compact and light weight.
● Dual beams, wide and red, switchable underwater.
● Automatic shut-off function eliminates the hot spot and the color tinting.
● A simple push button controls 4 levels of brightness (100, 75, 50 and 25%).
● Removable and compact battery. The battery is approved for airline travel.
● The battery is charged via Micro USB cable.
● The operation and remaining battery charge is displayed on the built-in LED display.
●  High  Temperature  Protection  Mode  prevents  internal  damage  to  the  light  if  the  light 

becomes too hot during use.

● Flashing Signal is pre-programmed and cannot be disabled.

Product Features & Specifications

Brightness
Continuous Burn Time
Wide Beam Angle
Red Beam Angle
Usability in Air
Charge Time
Battery Type
Battery Capacity
Depth Rating
Size
Weight (In air)
Weight (In water)
Head Color
Set Includes

FIX NEO Mini 1000WR FS

1,000 lumens(Wide)/100 lumens(Red)
approx.90(Wide)/ approx.120(Red)
approx.95 degrees(In water) / approx.100 degrees(In air)
approx.95 degrees(In water) / approx.100 degrees(In air)
Useable (25% or less)
4 hours max.
Li-Ion*
3,100mAh
100m
W38 x H40 x L141mm
165g (w/o YS adapter)
60g
Stealth Black/Frosted Silver
Li-Ion Battery, Battery Charger, USB cable (A-micro B), YS Adapter,
Wrist Lanyard, Spare O-ring, O-ring Grease, O-ring Remover,
Allen Wrench x 2, Lock Screw

Product Name

*It can be replaced with two CR123 batteries.

Summary of Contents for FIX NEO Mini 1000 WR FS





























Reviews: