Fisheye FIX NEO Mini 1000 WR FS, User Manual

①

①

②

②

③

③

④

④

- 19 -

1. Insert the included adaptor holder by sliding 

from the back of the light body and secure by 
two screws.

2. Insert the included YS adaptor by sliding from 

the back of the adaptor holder. YS adapter 
has 2 holes: install the round shaped side to 
the front and oval shaped side to the back.

3. Secure the included lock screw in the round hole by tightening 

clockwise.

4. Other adaptors than the YS mount can be used. Alternate adaptors 

include a 1” ball mount, GoPro mount, and Loc-Line mount. 
Alternate mounts must be purchased separately.

How to Use

Attaching adaptor holder and YS adaptor

Loading the Li-ion battery into the battery holder: insert the negative end of the battery 
first. Inserting the positive end first might damage the battery holder’s contact spring.
Removing the Li-ion battery from the battery holder: push the positive end of the battery 
first into the contact spring first, then pull the positive end up slightly, then release 
pressure on the positive end allowing the contact spring to push the battery out of the 
holder. Removing the battery from the negative end may damage the contact spring.

1. Hold the body case firmly and remove the light head by rotating counter-clockwise.
2. Confirm polarity and install Li-ion battery to the battery holder.
3. Make sure that there is no dirt or water drops on the metal terminal of the battery holder.
4. Tilt the body case and load the battery holder.
5. Hold the body case firmly and attach the Light Head by rotating clockwise. Battery removal is 

the opposite procedure.

Battery Loading

CAUTION

-

+

Battery Holder

Metalic Terminal

Li-ion Battery

Micro USB Socket

Lock Screw

Adaptor Holder

YS Adaptor