3
WARNING
The
Freedom
FISHR
™
is a low voltage, electro-mechanical device posing
little risk for electrical hazard and injury. However, NEVER use or operate this device
without covers installed, if any components show signs of damage, or if the product
has been exposed to water. Disconnect all power cables in case of damage and after
each use. Contact Fishing Abilities, Inc. for parts and service.
The user must determine the suitability of this product and assumes all
risk and liability for operation.
SET UP
1.
After unpacking, verify that all contents are present.
2.
Freedom
FISHR
™
power-assist reel
1.
Locate the Anti-Reverse Lever on the underside of the reel. Refer to the Shimano
Instruction Guide for description of reel components.
2.
Verify that the Anti-Reverse mechanism is engaged (Lever tab flipped to motor
side of reel and Lever tab mounting screw head is hidden).
3.
Mount
Freedom
FISHR
™ power-assist reel to rod.
3.
CONTROLLER ASSEMBLY
1.
While holding the rod and
Freedom
FISHR
™,
determine the best placement for the Rocker Switch
actuator. This is usually underneath the thumb when
holding the rod and reel in a natural position. Mount
the Rocker Switch enclosure to the rod using the
included cable ties.
2.
Connect power lead from the
switch enclosure to the
Freedom
FISHR
™ motor input.
