F1300N.2 Rotary Table Operating Manual
© 2022 Fisnar
- 11 -
F1300N.2 Rev 01
1.
On / Off Switch
Used to switch the machine on or off.
2.
Fuse
A 2.5A fuse is located here to protect the internal electrical circuit.
3.
I/O Connector
Where the external machine I/O input signals and output signals are
connected.
A courtesy 24V + output is also included on the I/O Connector.
4.
Ext. Control
Connector
Used in applications where external start and stop controls will be used
and/or when the machine is placed inside a safety enclosure and
connected to an external safety circuit with an externally fitted safety relay.
The optional remote operation box (F1300AKIT-EXTBOX or F1300AKIT-
EXTBOX-SR) can be used in the instances described above.
If this connection is not utilized, the shorted EXT. Control plug MUST be
inserted.
5.
Ground
connection
A safe and secure machine grounding point; to be used when the power
input adapter is not connected directly to a grounding point.
6.
Cylinder In Port
(4mm OD)
The pneumatic tubing labelled “Cylinder In” from the z-axis drive
assembly is connected here.
7.
Spray Air Out
Port
(6mm OD)
If a spray valve is being used on the machine, then the atomizing air port
of the spray valve is connected here.
If this connection is not required for use, it is recommended that a blanking
plug be inserted into this port.
8.
Cylinder Out
Port
(4mm OD)
The pneumatic tubing labelled “Cylinder Out” from the z-axis drive
assembly is connected here.
Summary of Contents for F1300N.2
