F1300N.2 Rotary Table Operating Manual
© 2022 Fisnar
- 31 -
F1300N.2 Rev 01
OPERATION MODES
FIG. 10: Standard Mode
STANDARD MODE
Standard Mode allows the machine to dispense a single continuous circular fluid bead onto a
workpiece.
1.
Touch the
button to enter the “Machine Settings” screen and touch the
operation mode button until the button displays the text “Standard Mode”.
Then touch the back button to exit the “Machine Settings” screen and return back
to the “Production” screen.
2.
Touch the parameter value cell e.g.
to input the required parameter
value.
Dispense Angle
: Sets the angle (degrees) duration that the motor will rotate for
whilst dispensing fluid material.
Tail Angle
: Sets the angle (degrees) duration that the motor will continue to rotate
for after the dispense angle. No fluid material is dispensed during the tail angle.
Summary of Contents for F1300N.2
