F1300N.2 Rotary Table Operating Manual
© 2022 Fisnar
- 52 -
F1300N.2 Rev 01
OUTPUT SIGNALS
Output Type:
Open Collector Photocoupler (NPN)
Output Power:
Output signals are able to sink a maximum of 250 milliamps per pin.
Output Function:
When the output signal is activated, the circuit between the output pin (pin
#5, 9, 11 & 14) and the GND (pin #6, 10, 12 & 15) is completed.
FIG. 24: Example of I/O output port driving
PLEASE READ: If an inductive load (such as a relay) is connected to an output
signal, be sure to install a diode as shown to prevent damage to the output
photocoupler.
FIG. 25: Installation of Diode
INPUT SIGNALS
Input Type:
Photocoupler
Input Power:
Pin #3 and #7 are an externally driven dry-contact voltage free contact closure
circuit (I.E. Switch or Relay).
Input Function:
To activate an input signal, pull the input pin (pin #3, #7) down to a GND pin
(pin #4, #8). Input signals utilize the machine internal power supply.
FIG. 26: Example of I/O input port driving
PLEASE READ:
A dry contact closure between inputs (pin #3 or pin #4) and any ground will
trigger an input signal. DO NOT apply a voltage to input pin #3 or pin #4 and
ground. Doing so will damage the internal control board and void all warranty
conditions.
Summary of Contents for F1300N.2
