F1300N Rotary Table Operating Manual
Section 3: Teaching Overview
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
info@fisnar.com
20
2.2 Test Screen
Below is a list of functions, which are found under the Test Screen:
Function
Description
Cylinder Up
Shows a red or green light to show when this function is
active or in active. When active it shows the drive
cylinder is at the top of its location. And when inactive it
shows the cylinder isn’t at the top of its location.
Cylinder Down
Shows a red or green light to show when this function is
active or in active. When active it shows the drive
cylinder is at the bottom of its location. And when
inactive it shows the cylinder isn’t at the bottom of its
location.
Motor
Shows a red or green light to show when this function is
active or in active. When active it shows the motor is
rotating at the speed set in the production screen. And
when inactive it shows the motor isn’t moving.
Glue
Shows a red or green light to show when this function is
active or in active. When active it shows the dispense
solenoid is active and the rotary table is dispensing fluid.
When inactive the solenoid is close and no fluid is being
dispensed.
Glue On/Off
This button actuates the dispense solenoid in the rotary
table system to test if it is functioning correctly. On,
opens the solenoid to dispense fluid. Off, closes the
solenoid and stops fluid from being dispensed.
Cylinder On/Off
This button actuates the drive cylinder to move from its
top position, to its bottom position. On, drives the
cylinder from its top position to its bottom position. Off,
drives the cylinder from its bottom position to its top
position.
Motor On/Off
This button activates the motor to rotate at the speed set
in the production screen. On, starts the motor rotation.
Off, stops the motor rotation.
