F1300N Rotary Table Operating Manual
Section 3: Teaching Overview
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
info@fisnar.com
22
2.3 Setup Screen
Below is a list of functions, which are found in the Setup Screen:
Function
Description
Language
This opens a drop-down menu to choose a language to
set the machine in.
Motor acceleration Time
The Motor Acceleration time is a parameter which sets
the speed it takes for the motor to reach the set RPM
from the production screen. The time is set in
milliseconds. The higher the value the longer the time of
increased speed. Speeds can be set from 50ms –
999ms.
Auto Cycle Delay
This chooses a time in seconds, to have as a delay
between automatic cycles.
Test Screen
This is where to set the password for the Test Screen
Setup Screen
This is where to set the password for the Setup Screen
Screen Lock
This button stops the parameters in the production
screen from being changed within the program.
Reset Count
This resets the total cycle count being counted in the
Setup Screen to 000000000.
Cycle Count Limit
This sets a value in the setup menu which creates a limit
of cycles when reached will send a service requirement
alert.
Program Select
This opens a drop down menu to select which program
to have the rotary table work in. being from program 1 –
9.
Firmware Version
This shows which software version the rotary table is
using.
