F4000N Series Operating Manual
Section 4: Programming Example
Part # 562187N-1
Rev. D Sep 2012
30
© 2012 Fisnar Inc.
3.
Editing a Program
You can move through the instructions in an existing program by using the following keys:
Key
Function
▲
Moves forward (1) memory address
▼
Moves backward (1) memory address
▲
Moves to the first memory address in the program
▼
Moves to the last programmed memory address in the program
MOVE
Moves the tip to the XYZ point location of the selected point
JUMP
Jumps to display the specified memory address
3.1
Changing a Point’s XYZ location
To change the XYZ location of a point, press the
▲
or
▼
key until the point you want to
change is shown in the display.
You can confirm that the correct point is in the display by pressing the
MOVE
key. This will
cause the tip to move to the XYZ position shown in the display.
Now use the jog keys
X
,
X
,
Y
and
Y
and the
Z
/
Z
keys to jog the tip to the new
location.
Once the location is correct, simply re-register the point as you did when it was first
taught, by pressing the
F1/ENTER
key and selecting the point type. The point will be re-
registered at the new location.
3.2
Insert / Delete an Instruction
To insert an instruction, press the
INS
key. The point currently shown in the display
will be moved forward one memory address. A new, empty memory address will be
inserted at the current memory address.
To delete the instruction currently shown in the display, press the
DEL
key, and
then press the F1 (Yes) key.
Summary of Contents for F400N Series
Page 118: ......
