F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
40
© 2012 Fisnar Inc.
Instruction
Display Shows
6
Type
3
to specify three rows, and then press
ENTER
.
Step & Repeat
Address, 8
---------------------
X Offset:
Y Offset:
Unit: mm
7
In the above example, the X Offset between
parts is 30 mm.
Type
30
to specify an X Offset of 30 mm, and
then press
ENTER
.
Step & Repeat
Address, 8
---------------------
X Offset:
Y Offset:
Unit: mm
8
In the above example, the Y Offset between
parts is 25 mm.
Type
25
to specify 25 mm, and then press
ENTER
.
Step & Repeat
Address, 8
---------------------
X Offset: 30
Y Offset:
Unit: mm
9
The display will prompt you to select
1. S Path
or
2. N. Path
.
Selecting
S Path
will cause the first row 1 to 4 to
be dispensed, then the second row 4 to 1, and
then the third row 1 to 4.
Selecting
N PATH
will cause the first row 1 to 4
to be dispensed, then the second row 1 to 4, and
then the third row 1 to 4.
Press
1
to select
S PATH
, and then press
ENTER.
Step & Repeat
Address, 8
---------------------
1. S Path
2. N Path
Select:
10
The program is now complete.
Press
F1/ENTER
, and then select End Program
to mark address 9 as the new
End Program
instruction.
Press the 7 key then press ENTER.
Press
RUN
to run the program.
Summary of Contents for F400N Series
Page 118: ......
