F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
55
© 2012 Fisnar Inc.
2.
F2 (Menu 1)
2.1
Group Edit
Group Edit is a powerful utility, which allows several different functions to be applied to a
user-defined group of addresses. These functions include copy, delete, move, multiply line
speed, multiply dispense times, apply X Offset, apply Y Offset, and apply Z Offset.
2.1.1
Copy
For example, to use group edit to copy addresses 1 – 20 in the current program to
memory address 21 - 40:
Instruction
Display Shows
1
Press the
F2 (MENU 1)
key, then
1
to select
Group Edit
.
The display will prompt the user to enter the
starting memory address of the group to edit
(
From
) and the ending number of the group to
edit (
To
).
GROUP EDIT
FROM: 1
TO: 1
(1 <-> 4000)
F1: All F2: End
2
Type
1
then press
ENTER
to register 1 in
From
.
Type
20
then press
ENTER
to register 20 in
To
.
GROUP EDIT
ADDR: 1-20
------------------------
1.Copy 5.Dispense Time
2.Delete 6.Offset
3.Move 7.Offset (R.E)
4.Line Speed
Select:
3
The
Group Edit
menu will then appear, allowing
the user to select an operation to be applied to
the range of points.
Press
1
to select
Copy
. Then press
ENTER.
GROUP COPY
------------------------
SOURCE 1-20
Destination:
4
The display will prompt the user to type the
destination memory address where the data will
be copied.
Press the Clear key to erase the old value, then
type
21
and press
ENTER
to select destination
memory address number 21.
GROUP COPY
SOURCE 1-20
Destination: 21
1.Yes 2.No
Select:
5
The display will now prompt the user to confirm
the copy. Press
1
and then press ENTER to
select
Yes
and perform the copy.
Summary of Contents for F400N Series
Page 118: ......
