F4000N Series Operating Manual
Section 5: Point Type & Function Reference
Part # 562187N-1
Rev. D Sep 2012
57
© 2012 Fisnar Inc.
2.1.3
Move
To use group edit to move addresses 10 – 20 in the current program to memory
addresses 50 – 60:
Instruction
Display Shows
1
Press the
F2 (MENU 1)
key, then
1
to select
Group Edit
.
The display will prompt the user to enter the
starting memory address of the group to edit
(
From
) and the ending number of the group to
edit (
To
).
GROUP EDIT
FROM: 1
TO: 1
(1 <-> 4000)
F1: All F2: End
2
Type
10
then press
ENTER
to register 10 in
From
.
Type
20
then press
ENTER
to register 20 in
To
.
GROUP EDIT
ADDR: 10-20
------------------------
1.Copy 5.Dispense Time
2.Delete 6.Offset
3.Move 7.Offset (R.E)
4.Line Speed
Select:
3
The
Group Edit
menu will then appear, allowing
the user to select an operation to be applied to
the range of points.
Press
3
to select
Move
. Then press ENTER
GROUP MOVE
------------------------
SOURCE 10-20
Destination:
4
The display will prompt the user to type the
destination memory address where the data will
be moved.
Press the
Clear
key to erase the old value, then
type
50
and press
ENTER
to select destination
memory address number 50.
GROUP MOVE
SOURCE 10-20
Destination:
50
1.Yes 2.No
Select:
5
The display will now prompt the user to confirm
the move. Press
1
and then press
ENTER
to
select
Yes
and move the data.
Summary of Contents for F400N Series
Page 118: ......
