Fit4Home ES893, User Manual

13

MAINTENANCE

CLEANING

The bench can be cleaned with a soft clean damp cloth.Do not use abrasives or solvents on plastic parts.

Please wipe your perspiration off the bench after each use.Be careful not get excessive moisture 

on the computer display panel as this might cause an electrical hazard or electronics to fail.

Please keep the bench, especially the computer console out of direct sunlight to prevent screen 

damage.

Please inspect all assembly bolts and pedals on the machine for proper tightness every week

STORAGE

Store in a clean and dry environment away from children.

TROUBLESHOOTING

PROBLEM

POTENTIAL CAUSES

SOLUTION

Base is unstable.

1. Floor is not flat or there is small 

object under the front or rear 

stabilizer.

2. The rear stabilizer end caps

have not been leveled when

adjusting.

1.  Remove the object.

2.  Adjust the rear stabilizer 

end caps.

Handlebar is 

shaking.

The Bolts are loose.

Tighten the Bolts.

Loud noise from the 

moving parts.

The interval of the parts is 

improper tighten.

Open the covers to adjust.

No resistance when 

riding the bike.

1. The interval of the magnetic

resistance increases.

2. Tension control knob is 

damaged.

3. Belt slips.

4. The bearing set is damaged.

Open the covers to adjust.

2. Change the tension 

control

knob.

3. Open the covers to adjust.

4. Change the bearing set.