Fit4Home F4H-EB-KPR4890W, User Manual

8

ASSEMBLY INSTRUCTIONS

STEP 2 : 

Handrail,Foot Bar and Foot Pedal Installation

1.   Remove four M6x10 Bolts (22) from the Main Frame (1), and take out two Locking Plates (21).

2.  Install the Axle (20) to the Main Frame (1), tighten with Spanner provided.

3.  Then attach two Locking Plates (21) to the Axle (20) with removed four M6x10 Bolts (22). 

Tighten with the Allen Wrench S5 provided.

4.  Assemble the Handrail (5) to the Main Frame (1) with two Ф26xФ16x0.3 Wave Washers 

(23), two Ф28xФ16x5 D-shaped Washers (25), two Ф10xФ25x2.0 Flat Washers (26), two 

Ф19.5xФ11.5x3.0 Spring Washers (27) and two M10x20 Hexagon Bolts (28). Tighten with the 

Allen Wrench S6 provided.

5.  Remove one Spacer (62) and Right Nylon Nut (70) from the Right Foot Pedal (61).

6.  Attach the Right Foot Bar (6) onto the right Crank (68) using Right Foot Pedal (61), one Spacer 

(62) and Right Nylon Nut (70). Tighten the Right Foot Pedal (61) by hand clockwise and tighten 

the Right Nylon Nut (70) counter-clockwise with Spanner provided. 

7.  Repeat the same procedure to attach the Left Foot Bar (6) onto the left Crank, tighten the 

Left Foot Pedal (60) counter-clockwise and tighten the Left Nylon Nut (69) clockwise with  

Spanner provided. 

8.  NOTE: Do not turn the Left pedal clockwise to tighten or will strip the threads.