background image

 

Safety Precautions 

Continued 

P r e c a u t i o n s … P l e a s e   r e a d   b e f o r e   a s s e m b l y   o r   o p e r a t i o n s  

12. 

Inspect and tighten all parts often. Replace any worn parts immediately. The safety level 

of the equipment can only be maintained if it is regularly examined for damage and/or wear 
and tear. 

 
13. 

Always  use  the  equipment  as  indicated.  If  you  find  any  defective  components  while 

assembling or checking the equipment, or if you hear any unusual noises coming from the 
equipment  during  use,  stop  immediately.  Do  not  use  the  equipment  until  the  problem  has 
been rectified. 
 

14.

 Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may 

get caught in the equipment or clothing that may restrict or prevent movement. 
 

15. 

Do not exceed maximum recommended user weight of : 250 lbs, 113 kg  

 

16. 

The  equipment  is  suitable  for  home  and  office  use  only.  Do  not  use  in  commercial  or 

rental  settings.  This  item  was  not  intended  or  designed  for  use  in  commercial  or  public 
places. 
 

17

.  Keep  wires  from  getting  tangled  in  pedals.    Suggestion  is  to  wrap  computer  charging 

wires over meter holder to keep away from pedals and in center of desk, NOT on side. 
 

18. 

Do not stand while pedaling.  

        For light use only 
 
19.  SADDLE  COMFORT 

We  here  at  Revo  Innovations  LLC  love  cycling  and  try  to  ride 

everyday. But we do remember how painful it was to “adjust” to cycling saddles. There is no 
“magic”  way  to  ease  the  discomfort  caused  when  spending  time  on  a  saddle.  The  good 
news is it can be a “one time” event. As a safety precaution we recommend you consult with 
a doctor if you feel pain or are concerned about issues that are outside the explanation here 
about saddle comfort. We recommend these tips to help make adjusting easier. 
- Wear padded cycling shorts 
- When you feel pain exit cycle and walk around for a few minutes before getting back on 
- Use padded saddle cover (we like the sheepskin type) 
- Try different saddles (we have adapter available for lowest possible costs) with free return 
shipping. 

 

Summary of Contents for FDX 2.0 - 002

















Reviews: