K
R
ASSEMBLY
7
Step 1:
Install the
Rear Stabilizer
(I)
to
the Main Frame
(K)
.
Be sure to tighten it
securely.
Figure 1
Note:
The Rear
Stabilizer
(I)
has
transport wheels.
Note:
Most of the
mounting hardware
is pre-installed for
easy matching
during assembly.
Step 4:
Using the supplied Wrenches
(BB1) (BB2)
attach the Left Pedal
(B)
(106L)
to the crank arm by tightening the pedal and holding the back nut at
the same time.
Figure 4
Step 5:
The Right Pedal
(B) (106R)
is installed the same way using the
supplied wrenches.
(BB1) (BB2).
Figure 5
WARNING:
Make sure the pedals are threaded properly to ensure you do
not damage the threads.
Note:
The Pedals must be made extra tight. Use the included Wrenches or
a 15mm wrench to finish tightening.
Step 2:
Install the Front Stabilizer
(J)
to the Main
Frame
(K)
. Be sure to tighten it securely.
Figure 2
Note:
Check Base Stabilizers for tightness periodically.
FIGURE 2
FIGURE 3
FIGURE 4
B
DETAIL
Step 3:
Unlock the
Main Frame
(K)
to the
open position by pulling
the Frame Lock Pin
while pushing lightly
with your foot on the
stabilizer, then release
the Frame Lock Pin.
Figure 3
BB2
FIGURE 5
B
BB1
BB1
BB2
FIGURE 1
J
I
K
K
Summary of Contents for FDX 3.0
Page 2: ......
