6
25% Cyan
0% Magenta
60% Yellow
0% Black
45% Cyan
0% Magenta
100%Yellow
0% Black
75% Cyan
0% Magenta
100%Yellow
0% Black
35% Black
HALF LOGO WIDTH
(A)
Product logo
(A)
(A)
(A)
ASSEMBLY INSTRUCTIONS
1
Position the Front Stabiliser (7) in
the front of the Pedal body (6)
and align the bolt holes. Attach
the Front Stabiliser (7) onto the
front curve of the pedal body
(6) with 2 x No. 2 Bolt set. Tighten
with the Multi Hex Tool (No. 8 Tool)
provided.
2
Each pedal and pedal shaft are
marked R for Right and L for Left.
Insert pedal shaft of left pedal (16)
into the threaded hole in the left
crank. Turn the pedal shaft by hand
in a counter-clockwise direction
until snug.
Do NOT turn the pedal shaft in the
clockwise direction, as this will strip
the threads.
Tighten the pedal shaft of the Left
pedal (16) with the Multi Hex Tool
with Phillips Screwdriver (No. 8 Tool)
provided.
Insert pedal shaft of Right Pedal
(17) into threaded hole in the right
crank. Turn the pedal shaft by hand
in clockwise direction until snug.
Tighten the pedal shaft of the Right
Pedal (17) with the Multi Hex Tool
with Phillips Screwdriver (No. 8 Tool)
provided
FITERA BIKE IM - Final 0917.indd 6
27/09/2017 16:09:31
