30
STEP 3
1. Insert the guide tubes (07) through the
bridge tube (08) and secure using 2 washers
(33) and 2 bolts (22)..
2. Attach the bridge tube (08) to the main
support tube (05) and secure using 2 bolts
(30), 4 washers (35) and 2 nuts (39).
STEP 4
1. Pass the bolt of each backrest bracket (15) through the main
support tube (05) and secure using 1 washer (34) and 1 nut (39).
2. Attach the backrest (59) to the backrest brackets (15) and secure
using 4 bolts (24) and 4 washers (35A).
3. Attach the seat (60) to the mountings on the seat support tube
(04) and secure using 4 bolts (24)
and 4 washers (35A).
4. Attach the elbow pad (70) to the
elbow pad tube (68) and secure
using 2 bolts (24) and 2 washers
(35A).
5. Attach the elbow pad tube (68) to the
seat support tube (04) and secure
using the elbow tube knob (71).
6. Insert the rubber stop (52) into the
front side of seat support tube (04).
7. Attach the leg curl tube (06) to the
front of the seat support tube (04)
and secure using 1 bolt (29), 2 washers (36) and 1 nut (40).
8. Insert the leg curl pad tube (14) through the leg curl tube (06), then
attach the leg curl pads (54) to either end of the leg curl pad tube (14).
Summary of Contents for 1110029
Page 2: ......
Page 44: ...Manual revisado en mayo de 2019 www fitfiu es ...