13
8. Display Range of Each Item:
Item
Initial
Original data
Range
Display range
Time (min: sec)
0:00
30:00
5:00-99:00
0:00-99:59
Incline (step)
0
0
0-15
0-15
Speed (km/h)
0.0
0.8
0.8-18
0.8-18
Distance (km)
0
1.0
0.50-99.9
0.00-99.9
Heart rate (time/min)
P
N/A
N/A
50-200
Calorie (K)
0
50
10-999
0-999
9. Function of the safety key
All of the display window will show
“---” and the alarm beeps for 3 sound if you pull off the safety
key. And meanwhile any operation is not available. If you want to continuous please insert the
safety key first.
10. Energy saving mode
If there is not any operation in 10 munities, the machine will enter into energy saving mode. And do not show
anything. You can wake the system by pressing any key.
11. Switch off
You can switch off any time if you want to stop training and it won`t do any damage to the machine.
12. Attention:
1) Please check the power and the safety key is well or not.
2) If any accident happened during exercising, please pull out the safety immediately until it stop.
3) If there is something wrong with the machine, please connect the retailer as soon as possible. It`s not
allowed to repair the equipment by non-special person.
13. Simple Malfunction and Solution:
1) Switched on but without any signal on the display.
A. Check the overload protection is work or not, if so, press it down.
B. Check the switch, overload protection and the cable between the driver and the voltage transformer
are ok or not and make sure the connection is good.
C. Check the connection between the driver and display is ok or not and.
D. The voltage transformer is broken, replace the transformer.
2) The display shows E01 after switch on.
A. There something wrong with the signal cable. Please check each cable between display and the
Summary of Contents for YK-ET1402B
Page 18: ...17 Explosive Drawing...
