background image

 

 

Safety Precautions

 

Thank you for purchasing this treadmill, it has been designed and manufactured to give you many years of trouble 

free  service.  You  may  already  be  familiar  with  using  a  similar  product  but  please  take  the  time  to  read  these 

instructions which have been written to ensure that you get the very best from your purchase. 

Warnings 

1.  To reduce the risk of serious injury, read the following important warnings before using the treadmill.   

2.  Before starting any exercise program you should consult your doctor to determine if you have any physical or 

health conditions that could create a risk to your health and safety, or prevent you from using the treadmill 

properly.  Your  doctor’s  advice  is  essential  if  you  are  taking  medication  that  affects  your  heart  rate,  blood 

pressure or cholesterol level. 

3. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if 

you  experience  any  of  the  following  symptoms:  Pain,  tightness  in  your  chest,  irregular  heartbeat,  extreme 

shortness of breath, feeling light-headed, dizzy or nauseous. If you do experience any of these conditions 

you should consult your doctor before continuing with your exercise program. 

Electrical Safety Precautions 

Failure to observe the following warnings may increase the risk of an electric shock and personal injury. 

1.  Always check the power cable for damage prior to use. If any damage is observed, do NOT use the power 

cable.     

2.  Never touch the power cable with wet hands.   

3.  Position the power cable so that it cannot be walked on or pinched.   

4. 

Only the supplied power cable should be used with the treadmill. 

 

General Safety Precautions 

1.  Use the treadmill only in the way described in this instruction book. 

2.  Ensure that the voltage of the electrical supply is the same as that indicated on the power cable.   

3.  It  is  the  responsibility  of  the  owner  to  ensure  that  all  users  of  the  treadmill  are  adequately  informed  of  all 

warnings and safety precautions. 

4.  The treadmill is heavy and should be removed from the packaging and assembled by two people.   

5.  Before assembling the treadmill, make sure that it is not plugged into any electrical source, such as a wall 

socket.   

6.  Use  the  treadmill on  a solid, flat  level  surface  with a  protective  cover  for  your  floor  or  carpet.  Position the 

Summary of Contents for YK-ET1402B





















Reviews: