Fitness Quest Edge 386da, Owner'S Manual

5

FIGURE 1
NOTE:

There are two FOOT TUBES. The REAR
FOOT TUBE has FOOT CAPS (6) on
each end and the FRONT FOOT TUBE
has WHEELS (7). 

Step 1. Remove the two M8 x 1.25 x 60 

CARRIAGE BOLTS (1), M8 WASHERS
(4) and M8 x 1.25 CAP NUTS (5) from
the REAR FOOT TUBE (2) with FOOT
CAPS (6).

Step 2. Attach FOOT TUBE (2) to rear of

FRAME (3) with hardware removed in
Step 1. Make sure to insert BOLTS
through "square holes" first.

IMPORTANT

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.

ASSEMBLY

FIGURE 2

FIGURE 2

Step 3. Remove the two M8 x 1.25 x 60

CARRIAGE BOLTS (1), M8 WASH-
ERS (4) and M8 x 1.25 CAP NUTS
(5) from the FRONT FOOT TUBE (2).

Step 4. Attach FOOT TUBE (2) to front of

FRAME (3) with hardware removed 
in Step 3. Make sure to insert BOLTS
through "square holes" first.

2

REAR
FOOT

TUBE

6

FOOT

CAP

1

M8 x 1.25 x 60

CARRIAGE BOLT

6

FOOT

CAP

3

FRAME

5

M8 x 1.25

CAP
NUT

FIGURE 1

3

FRAME

4

M8

WASHER

2

FRONT

FOOT
TUBE

5

M8 x 1.25

CAP
NUT

1

M8 x 1.25 x 60

CARRIAGE BOLT

7

WHEEL

7

WHEEL

4

M8

WASHER

Occasionally our products contain components that are pre-lubricated at the factory. We recommend that

you protect flooring, or anything else the parts may contact, with newspaper or cloth.