14
1.8. Parameters for 3 modes
1. Time Countdown mode:
a. Set time: 30:00min.
b. Range: 5:00-99:00min.
c. Add step: 1:00min.
2. Countdown cal.:
a. Set calories: 50 Kcal.
b. Set range: 20-990 Kcal.
c. Add step: 10 Kcal.
3. Countdown distance:
a. Set distance: 1.0 Km.
b. Set range: 1.0-99.0 Km.
c. Add step: 1.0 Km.
The menu cycles through Manual
→
Time
→
Distance
→
Calorie.
1.9. Customized programs
In addition to 18 built-in programs, the treadmill also has 3 customized programs to
support
the customized setting based on the user’s specific needs: U01, U02 and
U03.
1.9.1. Setting customized programs
On standby, press PROGRAM to navigate to the wanted program (U01- U03):
1.
“TIME” window is flashing: Displays the pre-set time.
2. Pres
s “”/ “INCLINE-”, “SPEED+/-” to set the running time.
3. Press MODE to confirm.
4. Set up parameters in the first time section:
a. Set speed by pressing SPEED +/ SPEED - or speed shortcuts.
b. Set incline by pressing I/ INCLINE - or incline shortcuts.
c. Press MODE to complete the first time section setting and continue to
set up parameters for the second time section, until all the 16 time
sections have been set.
Set parameters will be permanently saved until rewritten. These parameters will not
be lost due to power disconnection.
1.9.2. Start a customized program:
