15
On standby, press PROGRAM to navigate to the required customized program
(U01-U03). Set operation time and press START.
1.10. Others
•
When countdown parameters are completed, the screen will display END. The
alarm sounds for 0.5s every 2s until the treadmill is fully stopped. The treadmill is
set back to manual mode.
•
When setting parameters, you can cycle through the full range of 5:00-99:00. When
set at 99:00, press to reset it back to 5:00.
•
Countdown time, Countdown cal, Countdown distance: Only one parameter can be
set. In Countdown time time is counted down. In Countdown cal. and Countdown
distance time is counted up until set parameter is reached.
•
Cal. Standard value is 70.3Kcal/Km when incline is set to 0. (Calorie calculation
method:
70.3×V(Km/h)×t(h)×(1+?%)
•
When testing body fat, hold the heart rate handles for 5s to display body fat.
•
Switching between kilometers and miles: On standby, or when the safety key is
removed, hold PROG and MODE for 3 seconds at the same time. You will hear an
alarm sound, and your fastest speed will be showed.
Kommenterad [MP2]:
1.Tätät en ymmärrä? Ehkä käsitin
väärin tuon km/h ja mph vaihdon? Sana fastest ei oikein käy
järkeen tässä.
