Five9 Network Systems LLC.
X2000 Installation Manual
Document # 000001, Rev III, 03/2012
Page 5
variety of IO functionalities such as audio, additional USB ports and additional
Ethernet ports to meet different customer requirements.
2.0
Application
2.1 Introduction
The X2000 is a 100-240 VAC product that can serve as either a workstation or a
rack mount unit. It contains an Intel motherboard and CPU. Included also in the
unit is a 64 GB Solid State Drive (SSD) storage device
2.2 Typical Application
2.2.1 In cases where a workstation environment is required, the X2000 can be
placed on a table top. Connect a monitor and other required IO
peripherals through the connection ports on the system. When mounting
it sideways, please make sure the system is stable.
NOTE:
WHEN USED IN A SIDE-MOUNT CONFIGURATION, THE POWER
SUPPLY SHOULD BE ON THE BOTTOM SIDE.
2.2.2 In cases of rack mount environments, X2000 will be installed above or
below other servers. Specific rack mount instructions apply to the
installation process. Please see section 3 for more details.
3.0
Installation
3.1 Prior to Installation
The X2000 is a simple module to install. Before installation, the following items
should be considered
3.1.1 Careful consideration of the location of the X2000 is necessary. Some of
the items to consider include:
Space to allow adequate airflow