28 / 58
6
Win32 A pplication
A specific application is provided with the module to control any of its ports
without having to write a specific code.
Overview
IP address of
the module
Open or
close TCP
port
TCP port
number
Depends
on port
Connection
status
To open a TCP port on the module, the user has to set the correct IP
address of the module, to choose the correct TCP port in the list and to
click on the "Open" button. To close the port, simply click on the "Close"
button.
The status bar displays the status of the connection:
Connected
Disconnected
Error of connection
(if connection was not established within 30s)
Note:
If you forgot the IP address of the module, you can use the "Scan network"
feature of the "Connection" menu.
FMod-TCP User Manual v.2.8
