STEP 1
REMOVE PACKAGING
Before moving the cooktop indoors:
Remove outer carton and packing material from the
shipping base. The cooktop is now ready for removal
from the wooden base.
STEP 2
To simplify handling and to reduce the weight of
the cooktop:
Remove
the
grates.
Remove griddle/grill and housing.
STEP 3
POSITIONING/LEVELING
Built-in cooktops must be level to obtain
proper cooking results.
Built-in cooktops must be installed in a
cut-out and on a level surface, as illustrated.
SEALED TOP BURNER MODELS ARE
FACTORY SET FOR THE GAS FOR
WHICH THEY ARE TO BE USED. THEY
CANNOT BE CHANGED FROM ONE GAS
TO ANOTHER WITHOUT FACTORY
AUTHORIZATION.
Cooktops will either be set for use with
Natural gas or Propane (LP) gas. The
factory orifice setting is indicated by a
second alpha prefix letter in the model
number. The letter “T” indicates a Natural
gas setting. The letter “P” indicates a
Propane (LP) setting.
IMPORTANT
: The cooktop should always
be installed at countertop height or higher.
DO NOT INSTALL THE COOKTOP LOWER
THAN ADJACENT COUNTERTOP HEIGHT,
DUE TO RISK OF A FIRE HAZARD.
