11
Problem
Help
Lamp does not work
Check the connection to an operating mains
socket.
Check if the device is switched on.
Lamp is not adjustable
Make sure of using the right tool and if the screws
are too tight.
Illumination is not homogeneous
Close the cover of the lamp.
Lamp hums or warms up extremely
Disconnect the device from mains immediately
and consult your dealer! Mind chapter 4 and 10.
Material failure or open electronic
system caused to mechanical influences
Disconnect the device from mains immediately!
Do not touch the Lamp and consult your dealer!
Mind chapter 4 and 10.
10 Specifications:
Model
77450
77451
Operating Voltage
220-240 V AC at 50 Hz
220-240 V AC at 50 Hz
Power Consumption
90 LEDs - 6 W
60 LEDs - 5 W
5
6
3. Now change the lens to a new one of the same size with the same or a different
magnification.
7.2 Models 77450 and 77451:
The lens cannot be changed.
8 Care, Maintenance, Storage and Transport:
• Please clean the lamp only with a dry linen. Be careful with the cleaning to avoid
scratches. For intensive pollution you can damp the linen with some water. Do not use
cleaning supplies and chemicals, because they can corrode the plastic material.
• Attendance includes frequently checking of the stability. Models with hinged bracket are
to be checked for certain hold of the table clamp and of all screws. Please attend to
chapter 7 for a bulb change.
• Please store your Fixpoint®-Lenslight in a dry and dustproof surround when not used for
longer time. The lamp must be stored impenetrable for children. Please disconnect the
device from mains when not in use.
• Please retain the packaging to avoid damages during transport.
9 Troubleshooting:
