background image

16

Manual

NOTE:

10 Specifications:

 

 

 

 

                    

  Table to convert the temperature from °C to °F:

 

T(°C) * 9 + 32 = T(°F)

   

 

 

     5

11 Note on Waste Disposal:

  In according to the European WEEE directive, electrical and electronic equipment    

  must not be disposed with consumers waste. The consumer is committed by law 

  to reposit electrical and electronic devices to public collecting points or to the 

  dealer at the end of the devices lifetime for free. Particulars are regulated in 

  national right. The symbol on the product, in the manual or at the packaging  

 

  alludes to these terms. With this kind of application of used devices you achieve an 

important share to environmental protection.

WEEE Directive: 2012/19/EC

WEEE No.: 

82898622

12 CE-Declaration:

   This device corresponds to EU directives 2004/108/EC and 2006/95/EC: With 

  the CE sign Fixpoint

® 

, a registered trademark of the Wentronic GmbH ensures, 

  that the  product is conformed to the basic standards and directives. These 

  standards  can be requested online on www.wentronic.com. The mentioned 

directives replace all former national permissions in the European Union. All trademarks 

and registered brands are the property of their respective owners.

Operating voltage

220 - 240 V AC / 50Hz

Power of the soldering iron

40 - 48 W

Temperature adjusting range

150 - 450 °C

Display range

1 - 460 °C

Temperature Display

Ambient temperature

+5 to +40 °C

relative air humidity

less than 85 % (non-wetting)

Air pressure

600 - 1000 hPa

Dimensions (B x H x T)

115 x 120 x 140 mm (without soldering iron)

Weight

0.56 kg net, 0.87 kg gross weight

Summary of Contents for AP 2










Reviews: