Fixturlaser NXA Pro
M E A S U R E
Enter Dimensions
1.
Touch the tape measure icon on the
moveable machine image
2.
Measure the indicated dimension to the nearest 1 mm
for coupling dimensions or 2 mm for foot dimensions
enter using the keypad. Then press the check mark to
move to the next dimension. Continue and enter all
dimensions.
3.
Select the RPM of the equipment to set the alignment
tolerances, then press the check mark.
Measure Misalignment
The two preferred measurement methods:
1.
Select a measurement method by touching
to go to the toolbox.
2.
Touch the measurement icon on the stationary machine.
The measurement mode screen will open. Select the
Tripoint method and touch the check mark.
3.
Touch the check mark again to return to the alignment
measurement screen.
Tripoint (used in this example)
Express
