Fixturlaser NXA Pro
3.
If the sensors are not in proper position, a pop-up
will appear showing their position and with narrow
green slivers indicating where the sensors must be in
order to take live readings.
4.
Make the largest adjustment first. The arrows
indicate the direction of adjustment.
5.
Continue to adjust the movable machine, watching
the live readings, until both the angle and offset are
within tolerance.
6.
Tighten the bolts using the tightening sequence
established in Pre-Alignment.
7.
Some machines move laterally when tightening the
bolts. Make sure that the displayed values remain in
tolerance as you tighten the bolts.
C O R R E C T I O N
