is used in accordance with the operating instructions; b) the
electrical system of the premises where the appliance is used
is in conformity with current laws.
2. OPERATING INSTRUCTIONS
1.
Plug the power cord into a power outlet corresponding to the
voltage of the appliance.
2.
Move the switch to select the required temperature; by
means of this switch, 3 temperature levels can be selected
starting from position 1 (the lowest) up to position 3 (the
highest).
3.
Position the heat pad on the part of the body to be heated.
Do not use the appliance to heat animals!
4.
The heat pad will switch off after 60 minutes. The switch
must be positioned on “0” after treatment.
5.
When the appliance is not in use, keep it in a dry place and
do not stand heavy or sharp objects on it. Avoid creasing
the appliance.
If the heat pad fails to heat in any way:
• Make sure the heat pad has been plugged in properly. Check
the electric outlet by plugging another appliance into it.
• The heat pad will automatically switch off after 60 minutes
of continuous operation. Position the switch on “0” and try
starting it again.
• Check for faults in the power cord or the plug. Should you
detect a fault, do not use the heat pad.
• If the appliance fails to work take it to your local dealer or an
authorised service centre.
3. COVER WASHING INSTRUCTIONS
Before undertaking any cleaning operation, switch off and
unplug the unit.
WARNING: the inside part of the appliance cannot be
washed or dry cleaned.
• Take the cover off the heat pad.
DO NOT MACHINE WASH OR SPIN DRY!
•
Only wash the cover with neutral soap and lukewarm water
(max 40°C) and leave to hang dry to keep it soft.
DO NOT
USE THE HEAT PAD IF IT IS DAMP.
If the cover becomes discoloured, dry or worn, replace it with a
new one available from your dealer or authorized service centre.
The heat pad cover can be expected to become discoloured and
worn. This could be caused by excessive and prolonged heat.
4. TECHNICAL SPECIFICATIONS
Heat pad: Standard model (Type: EPT-PVC-01)
Voltage
220-240V~ 50/60Hz 100W
Mark