background image

Safety and User Information

AP BIO

400/500/1000/2400

6

FG-DC_10523-GB_AP Bio_IOM-R0-12/2020 • Subject to modifications

3.4

Identification of safety instructions

The following designations/symbols are used in this manual to specify safety 
instructions:

3.4.1 DANGER – Death/serious irreversible injury

Indicates an (extremely) hazardous situation which 

will result in death or serious 

irreversible injury

 if the safety instructions are not followed.

Example:

3.4.2 WARNING – Death/serious injury

Indicates a hazardous situation which 

can result in death or serious irreversible 

injury

 if the safety instructions are not followed.

Example

:

3.4.3 CAUTION – Minor or moderate injury

Indicates a hazardous situation which 

can result in minor or moderate injury

 if the 

safety instruction is not followed.

Example:

Electrocution through hazardous voltage will lead to death or serious injury.

Disconnect the unit from the power supply and ensure the power cannot be 
switched back on.

Ensure the unit is voltage-free and isolated, earth and short circuit the unit, cover 
or shield off neighboring live components.

Warning of contaminated filter surfaces!

When working on the unit or in case of damage to the components, there is a health 
risk injury the contaminated filter surfaces.

Wear protective clothing and safety goggles

Wear protective mask

Exercise due caution and attention when carrying out this work.

Sharp corners and edges can cause injuries!

There is a risk of cuts on thin edges when cleaning or maintaining the unit.

Wear resistant gloves.

Summary of Contents for AP BIO 1000

































Reviews: