Heat recovery unit RDKS - Technical manual
22
FläktGroup DC_9295GB_20190326_R5
We reserve the right to make changes without prior notice
RDKZ-41-3 ISYteq TOUCH 3.5 CONTROL PANEL - INSTALLATION AND CONNECTION
1. Open the control panel using a screwdriver.
2. Lift the display out of the enclosure.
3. Push the connection cable through a suitable hole and if needed
make an outlet for the cable on side of the cover.
4. Mount the enclosure directly on the wall or using the screws in a
junction box.
5. Connect the cable to the back of the display as shown above. NOTE!
Do not touch the electronics.
Push the display back into the enclosure.
6. Check that the control cable is correctly connected to the control
card before switching on the power supply.
USB
51
50
49
48
47
46
1 N
2 L
3 N
4 L
5 N
27
70 69 68 67 66 65 64
28
37
32 33 34
38
35 36
13 14 15 16
6 L
7 N
8 L
11 N
12 L
A
B
Ethernet card
(accessory)
ISYteq TOUCH 3.5
RDKZ-41-3
ISYteq BASIC
RDKZ-41-1