Heat recovery unit RDKS - Technical manual
5
FläktGroup DC_9295GB_20190326_R5
We reserve the right to make changes without prior notice
HOME
AWAY
FORCED
SYMBOLS DURING NORMAL OPERATION
ISYteq BASIC CONTROL PANEL - OVERVIEW OF SYMBOLS AND FUNCTIONS
Symbol
Description
AWAY mode
HOME mode
FORCED mode for 120 minutes
Defrosting mode. The unit resumes normal operation after 15 minutes
Switch operating modes between: AWAY, HOME and FORCED.
Disabled during defrosting
Min. 10 sec.
Press * for a minimum of 10 seconds to reset an alarm. Also see pages 11 and 12.
Continuously flashing alarm symbol indicates filter alarm. See page 11.
Three flashes at intervals indicates rotor alarm. See page 12.
Steady illumination indicates temperature alarm. See page 12.
No symbols illuminated
indicates that unit has
stopped.
See Other alarms on page 12.
Figure 5. Symbol description ISYteq Basic.
+