background image

 Roofmaster STEC non-insulated version - Installation and maintenance

2

FläktGroup DC_10082GB_20180213_R1

Specifications are subject to alteration without notice

1 IMPORTANT INFORMATION

Fläkt Woods fans comply with the requirements for health and 
safety of the EC Machinery Directive.
All fans leave the factory after being subjected to testing.
These instructions are intended for use by professional service 
staff. The installation, commissioning and operation of the fans 
must be carried out by professional staff who are familiar with the 
safety regulations. Tools and protective equipment necessary for 
preventing accidents from occurring while installing and operating 
the fan must be used/worn in accordance with the local safety 
regulations.
All personnel involved with the product must carefully study this 
operating manual and diligently comply with all orders and 
instructions.
Fläkt Woods does not accept responsibility for any damage 
that can be attributed to non-observance of these instructions. 
The warranty issued by the manufacturer will be forfeited if any 
changes to the product are made without the manufacturer’s 
consent.

2 SAFETY

This symbol is designed to point out all safety and 
danger related information regarding danger on the 
operating personnel’s lives and health.

Summary of Contents for Roofmaster STEC 190













Reviews: