Roofmaster STEC non-insulated version - Installation and maintenance
5
FläktGroup DC_10082GB_20180213_R1
Specifications are subject to alteration without notice
4 TRANSPORTATION AND STORAGE
4.1 TRANSPORT INSPECTION
Check the fan immediately after you receive it and make sure that
it has not been damaged during transport. If you discover any
damage, get in touch with the transportation company without
delay. Briefly rotate the fan impeller to see that it rotates easily.
Check the information on the fan rating plate.
Proper procedures must be followed when transporting the product!
Faulty conditions in transporting may result in serious damage to
the product
4.2 TRANSPORT SAFETY
The transport material is to be selected according to the packag-
ing and the weight of the product. Loading must be carried out
as instructed.
4.3 INTERMEDIATE STORAGE
If the fan is to be stored before or in between uses, the following
needs to be taken into account:
– Original packaging is to be used. If the storage conditions re-
quire it, additional protection may be added
– The storage environment must be dry, dust-free and not have a
high level of humidity (<70%)
– Storage temperature must be in between –20 °C and +40 °C
Before commissioning, the respective instructions must be stud-
ied thoroughly.
4.4 LIFTING OF THE FAN
Check the correct lifting method. If necessary, use the lifting lugs
as shown in the picture.
Fan weight can be found in this brochure at point 3.4 Dimensions
and weights. It is stated also in the fan labels.
