GLEB Kitchen exhaust fan
7
A
ll
ri
g
h
ts
r
e
s
e
rv
e
d
.
V
e
rs
io
n
1
1
/2
0
1
2
©
F
lä
k
t
W
o
o
d
s
Oy
5 Mounting Instructions
5.1 Installation of the fan
The fan is secured to a base by M8 pin bolts and nuts (4 pcs) in mounting holes across anti-
vibration mountings, included in delivery (see 3.1 Design, part 5). The base must be level and
stable. The fan must only be mounted to a horizontal plane.
The fan has three possible outlet directions (left/right/upwards), upwards as standard. Outlet
direction can be changed by detaching the standing skids (see 3.1 Design, part 3) and placing
them to desired side of fan casing (fixed with M8 bolts).
5.2 Fitting the accessories
Connections to duct system must always be done with flexible connections.
Providing necessary grounding for the accessories is within the constructor’s field of
responsibility.
5.3 Safety regulations
If the fan is equipped with optional frequency converter, care should be taken
that the frequency converter is always in upright position, even if the outlet
direction is changed.
The fan must be always equipped with safety switch. If the fan is delivered
without optional safety switch, the switch must be provided otherwise.
Residual risk due to inappropriate behaviour or malfunction during operation
cannot be completely excluded. The system planner or constructor must prevent
the emergence of any hazardous situations through suitable safety measures.
Note that the impeller may rotate due the air flow in duct system, even if the fan
is isolated from mains.
