20
www.flama.pt
pressure ring.
To stop the appliance, just release the
pressure ring.
Wait until the blade has come to a full stop
before removing the lid or blender cup
from the motorized base.
If you wish to add more food to the blender
cup during the blend cycle, turn off the
appliance and use the hole in the blender
cup lid.
Notes:
- To cut solid foods, add liquid (water, broth,
milk, etc.) without exceeding the indicated
maximum fill level.
The blender cup is appropriate for blending
vegetable soups; mayonnaise; milkshakes;
drinks, etc.
The blender cup is not appropriate for
beating egg whites, making mashed
potatoes or chopping raw foods.
TROUBLESHOOTING
Problem
Cause
Solution
The appliance does not
work.
The appliance is not
plugged into the electrical
socket.
Connect the appliance to the
electrical socket.
There is a slight burning
smell during operation.
First uses.
This is normal and will
disappear after the first few
uses.
Motor unit is overloaded.
Adhere to the indicated
quantities.
The device switches off
during operation.
Motor overheating.
Unplug the appliance from
the electrical socket and wait
30 minutes before plugging it
in again.
The blade does not
rotate.
Poor appliance assembly.
Follow the instructions in the
“Use and care” section.
Pieces are too big.
Cut the ingredients into
smaller pieces.
